HONDA CBR250R.....

What a crazy ride gives this?

The new Honda CBR250R is equipped with 249.4 cc, 4 storke, DOHC, 4valve water cooled engine. With the Bore x stroke size of 76 X 55 mm, CBR250R is able to produce massive power of 26.4 bhp (18.7KW) which peaks @8500 rpm (Electronically controlled) which makes the power to weight ratio at 163bhp/tonne.  You don’t need to engine rev hard as the maximum torque of 22.9Nm produced @7000 rpm.  As most of the power available at lower rev the bike will fire at traffic points.

Complete Specifications

Dimensions:

Length: 2030mm
Width: 709mm
Height: 1127mm
Wheelbase: 1369mm
Seat Height: 784mm
Ground Clearance: 148mm
Rake: 25°
Trail: 95 mm

Engine Type: 4 stroke, DOHC 4-valve, water cooled
Displacement: 249.4CC

Bore x Stroke: 76 x 55 mm
Compression ratio: 10.7 : 1
Maximum power: 26. 2 bhp (18.7 kilowatts) @8500 rpm (95/1/EC)
Maximum Torque: 22.9 Nm @7,000 rpm (95/1/EC)
Carburetion: Electronic Fuel Injection PGM-FI
Diameter of the venture: 38MM

Ignition: Transistorized with electronic advance
Transmission: Clutch: Wet multiplate with coil springs
Gearbox: Constant mesh 6-speed return
Final Reduction: Ring Chain
Final Drive: Chain
Training: Mechanical cable
Primary reduction 2.808
Final reduction 2.714

Electricals

Start Electric
Battery 12V/ 6AH
Headlight 55/60 watts
Chassis Frame Type: Double beam type steel tube (Diamond frame)
Kerb Weight: 161 KG/ 165 (C-ABS version)
Fuel Tank: 13 liter

Rim Front 17 M / C × MT 2.75
Rear 17 M / C × MT 4.00
Tire Front 110/70 ×17M / C
Rear 140/70 × 17M / C
Suspension Front telescopic fork, 37 mm, 130 mm travel
Rear Pro-Link Monoshock, 104 mm travel
Brake: Front Hydraulic disc 296 x 4.5 mm with 2-piston caliper and resin pads
Rear hydraulic disc 220 x 5 mm with single piston caliper and resin pads